Kingston 4GB 1600MHz DDR3L PC3-12800 1.35V Non-ECC CL11 SODIMM Intel Notebook Memory Kingston 4GB 1600MHz DDR3L/Notebook KVR16LS11/4 4GB module of 1600MHz DDR3 Notebook RAM DESCRIPTION This document describes ValueRAM’s 512M x 64-bit (4GB) DDR3L-1600 CL11 SDRAM (Synchronous DRAM), 1Rx8, low voltage, memory module, based on eight 512M x 8-bit FBGA components. The SPD is programmed to JEDEC standard latency DDR3-1600 timing of 11-11-11 at 1.35V or 1.5V. This 204-pin SODIMM uses gold contact fingers FEATURES JEDEC standard 1.35V and 1.5V Power Supply VDDQ = 1.35V and 1.5V 800MHz fCK for 1600Mb/sec/pin 8 independent internal bank Programmable CAS Latency: 11, 10, 9, 8, 7, 6, 5 Programmable Additive Latency: 0, CL – 2, or CL – 1 clock 8-bit pre-fetch Burst Length: 8 (Interleave without any limit, sequential with starting address “000” only), 4 with tCCD = 4 which does not allow seamless read or write [either on the fly using A12 or MRS] Bi-directional Differential Data Strobe Internal(self) calibration : Internal self calibration through ZQ pin (RZQ : 240 ohm ± 1%) On Die Termination using ODT pin Average Refresh Period 7.8us at lower than TCASE 85°C, 3.9us at 85°C < TCASE ≤ 95°C Asynchronous Reset PCB: Height1.18” (30mm), double sided component Lead Free RoHS Compliant for more information about Kingston 4GB 1600MHz DDR3L/Notebook visit official website of Kingston . Click Here for more Kingston product . Click Here